Filter
Top Products
Before using
14
LSQT0861
(40) Tripod receptacle
This is a hole for attaching the Camcorder to
optional tripod. (Please carefully read the
operating instructions for how to attach the tripod
to the Camcorder.)
≥When the tripod is used, operate the Camcorder
from the Magic Wire Remote Control with
Narration Mic for convenience. (When not using
the remote control, attach the clip to the grip belt
for convenience. When you move with remote
control attached to a pocket, etc., take care to
avoid tipping over the tripod.)
≥You cannot open the card slot cover when the
tripod is used. Insert the card first and then
attach the tripod.
(41) Shoulder strap fixture
≥Put the strap through the fixture 1 and through
the stopper 2 so it will not come off. Extend
part 3 by at least 1 inch (2 cm).
≥Fit the other end of the belt similarly.
(42) Lens hood
In order to remove the lens hood, rotate it
counter-clockwise 1. In order to fit it, put into slot
2, and then rotate it clockwise.
≥The lens hood has a built-in lens cover.
The one-touch free-style grip belt
ª To use as a hand strap
If you use the grip belt as a hand strap, then you
can carry or handle this Camcorder more easily.
1 Open the lock cover 1 by pinching the
projections 2 on both sides. Press the lock
button 3 to remove the grip belt.
≥When removing the grip belt, tightly hold the
Camcorder with both hands.
≥After removing the grip belt, restore the lock
cover to the original position.
2 Adjust the belt length.
1 Flip the belt.
2 Slide 1 in the direction indicated by the arrow.
3 Fix the belt.
3 Put your hand through the strap.
≥Use the Magic Wire Remote Control with
Narration Mic for more convenience.
(40)
(41)
2
3
1
1
2
1
2
(42)
2
1
3
1
3
2
1
LSQT0861Eng.book 14 ページ ２００４年１２月２２日 水曜日 午後２時３４分