Filter
Top Products
Before using
19
LSQT0861
ª Card access lamp
≥When the Camcorder accesses the card
(reading, recording, playback, erasing, etc.), the
access lamp lights up.
≥If the following operations are performed when
the access lamp is lit, then the card or the
recorded data may be damaged or the
Camcorder may malfunction.
≥Opening the card slot cover and inserting or
removing the card
≥Operating the [OFF/ON] switch or the mode
dial
ª
SD Memory Card
≥The memory capacity indicated on the SD
Memory Card label corresponds to the total
amount of capacity to protect and manage the
copyright and the capacity available as
conventional memory for a Camcorder,
personal computer or other equipment.
ª
Concerning the write protection
switch on the SD Memory Card
≥The SD Memory Card has a write protection
switch on it. If the switch is moved to [LOCK],
you cannot write to the card, erase the data on
it, or format it. If it is moved back, you can
perform those functions.
Using the lens cover
For the lens protection, be sure to close the lens
shutter when not in use.
1 Rotate the lens cover open/close ring.
Turning the Camcorder on
When the Camcorder is turned on with the lens
cover closed, the automatic white balance
adjustment may not function properly. Please turn
the Camcorder on after opening the lens cover.
ª
How to turn on the power
1
While pressing the button 1, set the [OFF/
ON] switch to [ON].
≥The power lamp lights up.
ª
How to turn off the power
1 While pressing the button 1, set the [OFF/
ON] switch to [OFF].
≥The power lamp goes off.
OFF
ON
POWER
1
OFF
ON
POWER
1
LSQT0861Eng.book 19 ページ ２００４年１２月２２日 水曜日 午後２時３４分