Filter
Top Products
Before using
14
LSQT0973
(37) Shoulder strap fixture
≥Put the strap through the fixture 1 and through
the stopper 2 so it will not come off. Extend
part 3 by at least 2 cm (1 inch).
≥Fit the other end of the belt similarly.
(38) Lens hood
In order to remove the lens hood, rotate it
counter-clockwise 1. In order to fit it, put into slot
2, and then rotate it clockwise.
Attaching the lens cap
Attach the lens cap to protect the surface of the
lens.
1 Run the end of the lens cap cord through
the hole in the grip belt attachment part and
run the lens cap through the lens cap cord.
≥When removed, the lens cap can be attached to
the lens cap fixture.
≥To attach or remove the lens cap, hold both
sides of the lens cap with the tips of your first
2 fingers.
The grip belt
Adjust the belt length so it fits your hand.
1 Adjust the belt length and the pad position.
1 Flip the belt.
2 Adjust the length.
3 Fix the belt.
(37)
3
2
1
1
2
(38)
1
3
2
LSQT0973ENG.book 14 ページ ２００６年１月３０日 月曜日 午前１１時４０分