Panasonic PV-GS180 Camcorder User Manual


 
Edit mode
48
LSQT0973
Printing pictures by directly
connecting to the printer (PictBridge)
To print pictures by directly connecting the
Camcorder to the printer, use a printer compatible
with PictBridge. (Read the operating instructions
for the printer.)
Insert a card and set to Picture Playback
Mode.
1 Connect the Camcorder and the printer with
the supplied USB cable.
1 USB cable
The [PictBridge] indication appears on the
screen of the Camcorder.
(When the printer is being recognized, the
[PictBridge] indication blinks.)
When no card is inserted in the Camcorder, the
[PictBridge] indication does not appear. (You
cannot print any pictures.)
When the Camcorder and the printer are not
connected properly, the [PictBridge] indication
keeps blinking. (It will blink for just over
1 minute.) Connect the cable or check the
printer.
We recommend using the AC adaptor as the
power supply.
When images are displayed in multi-screen,
they cannot be printed.
2 Select [SINGLE PRINT] or [DPOF PRINT].
If there is no file with a DPOF setting, you
cannot select [DPOF PRINT].
When you select [DPOF PRINT] for printing
set the number of prints in DPOF setting.
When [DPOF PRINT] is selected, print after
you determine the paper size.
3 Move the joystick left and right to select a
desired picture, and then press it.
4 Select the desired number of prints.
You can set up to 9 prints.
5 Select the setting for date printing.
If the printer is not capable of date printing,
this setting will be unavailable.
6 Select the paper size.
[STANDARD]: Size specific to the printer
[4k5 INCH]
[5k7 INCH]
[4k6 INCH]
[A4]
You cannot set paper sizes not supported on
the printer.
7 Set [PRINT] >> [YES] to start printing.
ª
When you stop printing halfway
Move the joystick down.
Avoid the following operations during printing.
These operations disable proper printing.
Disconnecting the USB cable
Removing the card
Switching the mode dial
Turning off the power
Check the settings for the paper size, quality of
print, etc. on the printer.
You cannot print pictures that cannot be played
on the Camcorder.
When the Camcorder and the printer are
connected in the Tape Recording/Playback
Mode, the [ WEB] or the [ WEB] Indication
may appear on the LCD monitor. However,
pictures cannot be printed.
1
PictBridge
LSQT0973ENG.book 48 ページ 2006年1月30日 月曜日 午前11時40分