Filter
Top Products
58
Others
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
Initializing the Modes
You can change the Menu settings back to the
shipping condition.
• Set to Tape/Card Recording Mode.
1 Set [ ADVANCE] >> [ INITIAL SET] >>
[YES].
• The initializing takes a little while.
• Initializing will not erase a clock setting (p. 24) that
has been adjusted.
To Display Date/Time Indication
This switches between date and time indications.
Set [ BASIC] or [ ADVANCE] >> [ DATE/TIME]
>> [D/T], [DATE] or [OFF]. (pp. 22, 23)
• The Camcorder automatically records the date and
time of picture taking on the tape.
• You can also show or change the Date/Time
Indication by repeatedly pressing the [DATE/TIME]
Button on the Remote Control (PV-GS35 only).
To Change the Display Mode
Set [ SETUP] >> [ DISPLAY] >> [ON] or [OFF].
Set to [ON] and the display mode can be switched to
all functions. Set to [OFF] and it can be switched to
minimum display. (pp. 22, 23)
Progressive Photoshot
You cannot use the Progressive Photoshot Function in
the following cases.
When using Tape Recording Mode
• Digital Zoom [ ]
• 1/750 s or faster shutter speed
• When brightness is insufficient
• When the MagicPix Function is ON
• When the Portrait is used
• When the Gain Up mode is set to ON
When using Card Recording Mode
• When brightness is insufficient
• When the Gain Up mode is set to ON
Power Save Mode
Set [ SETUP] >> [ POWER SAVE] >>
[5 MINUTES] or [OFF].
[OFF]:
When about 5 minutes passed without any operation,
the standby mode automatically will be set. In the
standby mode, [ ] blinks and it takes time more than
usual to start recording after you press the Recording
Start/Stop Button.
[5 MINUTES]:
When about 5 minutes passed without any operation,
the Camcorder automatically turns off to protect the
tape or to prevent the battery from running down.
When you use the Camcorder, turn it on again.
• The Camcorder cannot be automatically turned off
when you connect the USB Cable or the DV Cable
with the Camcorder or when the Camcorder is in the
PC Mode.
QXGA
:
2 048 or more
(White):
Photoshot Mode
(Red):
While Photoshot recording is activated
(Green):
While the Card being read
(Red):
Using the card that cannot be
recognized
Warning/Alarm Indications
If any one of the following indications lights up or
flashes, please check the Camcorder.
Confirmatory Indications
:
A cassette with the accidental erasure
prevention slider placed in the [SAVE]
position is inserted.
No cassette is inserted.
[--] / :
The built-in battery is low. (p. 24)
:
The Warning/Alarm Indication appears
when you record yourself. Turn the LCD
Monitor towards the Viewfinder and check
the Warning/Alarm Indication.
:
No card is inserted.
REMOTE: An incorrect Remote Control mode has
been selected. (pp. 14~15)
END :
The tape came to the end during
recording.
:
The video heads are dirty. (p. 65)
Textual Indications
DEW DETECT/ EJECT TAPE:
Condensation has occurred. Take out the
cassette and wait for a while. It takes some time
until the cassette holder opens, but this is not a
malfunction. (p. 64)
TAPE END:
The tape came to the end during recording.
NEED HEAD CLEANING:
The video heads are dirty. (p. 65)
PUSH THE RESET SWITCH:
An irregularity in the equipment has been
detected. Press the [RESET] Button (p. 70). This
may solve the problem.
LOW BATTERY:
The Battery is low. Recharge it. (p. 15)
NO TAPE:
No tape is inserted. (p. 17)
CHECK REMOTE MODE:
An incorrect Remote Control Mode has
been selected. This is only displayed at the
first operation of the Remote Control after
powering-on. (pp. 14~15)