Filter
Top Products
You can display a PInP (still image) screen
on the Main Picture.
• PinP position is fixed at the bottom right of
the screen,
Picture
Picture
(PinP still image)
4JOG KEY
f Before you begin
Conneol the Palmcorder to a power
source. (See pages 11, 12.) |
J
2MEN_
Button
Set POWER to CAMERA.
• The POWER lamp lights red.
° Be sure POWER is fully turned to
CAMERA position.
Press MENU to display the menu
screen,
3
Rotate JOG KEY to select
_, then press JOG KEY to
display the CAMERA FUNCTION menu
screen.
Press JOG KEY repeatedly to select
-PHOTOSHOT r_.
Button
• Press MENU twice to exit this menu.
AJm at the scene you wish to place as
PinP, then press CAMERA STILL to
freeze the image.
1 POWER Switch
5,6,7
CAMERA STILL Button
7
Press CAMERA STILL again to p{ace
the frozen image as PinP.
Press REClPAUSE to record a scene
with PinP image,
• Press PHOTOSHOT to record a
scene with PinP image in PhotoShot
mode.
• Press CAMERA STILL again to
remove PinP image.
You can record still pictures of any desired
duration together with sound.
1
While in RECORD mode, press STILL
and hold for 2 seconds to capture a
still picture, The captured still picture
will be recorded together with sound,
Press STILL once again to release
the still picture. The camera will
resume recording real-time pictures.
I i 3 " i