Filter
Top Products
29
Special Features
1Slide DIGITAL SELECT to D.ZOOM.
2Press D. ZOOM.
once ➞D.ZOOM 1 (150× maximum)
twice ➞D.ZOOM 2 (300× maximum)
The Higher digital magnification levels
may cause picture distortion.
3Hold down “T” on POWER ZOOM.
Digital Zoom starts when normal zoom
reaches maximum (26×).
• Zoom level appears in EVF or LCD monitor.
• POWER ZOOM switch controls digital
zoom level.
• Normal zoom resumes when level falls
to 26×.
4Press D. ZOOM to turn off Digital Zoom
so no indication appears.
2, 4
TW
3
Digital Zoom
Power Zoom magnification is digitally
increased.
Before you begin...
• Connect Camcorder to power source.
• Set POWER to CAMERA.
Digital Electronic Image Stabilization (E.I.S.)
1Slide DIGITAL SELECT to EIS.
2Press EIS to display “EIS” in the EVF or
LCD monitor.
• Image becomes slightly enlarged and
shutter speed auto-adjusts from 1/80 to
1/350 according to brightness.
• Use High Speed Shutter (page 25) if
needed. Shutter speed setting remains
after EIS is canceled.
3Press EIS again to cancel when not in use.
E.I.S. may not function during...
• extreme Camcorder movement.
• recording of subjects with distinct horizontal
or vertical stripes.
• low light situations (EIS indicator flashes).
• intense fluorescent lighting situations.
• recording of very fast motion.
Helps stabilize picture when recording in
unstable situations.
2, 3
Before you begin...
• Connect Camcorder to power source.
• Set POWER to CAMERA.
EIS
NORMAL
Note:
• If “NOW IN DIGITAL WIPE” is displayed when
D. ZOOM is pressed, DIGITAL SELECT is
currently in DIGITAL WIPE mode and the
DIGITAL ZOOM feature is not available.
Note:
• If “NOW IN DIGITAL WIPE” is displayed
when EIS is pressed, DIGITAL SELECT
is currently in DIGITAL WIPE mode and
the Digital E.I.S. feature is not available.
Digital EIS ON
D.ZOOM1D.ZOOM1
50×
1
1