Filter
Top Products
39
Special Features
Picture in Picture Wipe Title
Captured still images (page 35) can be
recorded along with the current picture.
Before you begin...
• Connect Camcorder to power source.
• Insert the CompactFlash Card (page 34).
• Set POWER to CAMERA.
1Set DIGITAL SELECT to DIGITAL
WIPE.
• A still image captured on the CF
card and the Multi image playback
page number is displayed on the
right side of the screen.
• If there are no recordings on the
card, “NO PICTURE” appears on-
screen.
2Press + (FF) or - (REW) to select
still image to be used.
3Start recording (page 16).
• When recording starts, Multi image
playback number disappears. Then
the captured still images can be
recorded along with the current
picture.
• To exit from the Picture in Picture
Wipe title mode, press
MODE (page
40).
1
P - P
SP
P20
Moving
Picture
Still image
Note:
• If CompactFlash Card is not inserted, “NO
CF CARD” appears on-screen. Set Power
to OFF, then insert the CompactFlash
Card.
• Pictures captured with other brand
products cannot be used with this
Camcorder.
• If “INCOMPATIBLE IMAGE” appears on-
screen, the size of the captured image
cannot be played back on this Camcorder.
• If “CF CARD ERROR” appears on-screen,
see page 56.
• If Picture in Picture Wipe Title is selected,
the following functions are not available:
Security mode, Auto Fade, Digital Fade,
Digital Filter, Digital Zoom, Digital E.I.S.,
Still/Strobe/Wide.
MODE
( P - P = Picture in Picture )
Multi image playback page number
Digital Still Camera
2
STOP
STILL
PLAY
REW
FF
+
DEL
CAMERA
OFF
VCR
PHOTO
3