Filter
Top Products
47
LSQT1211
Recording
≥ If the background or anything else in the scene
has colours similar to the skin colour, they will
also be smoothed.
≥ If the brightness is insufficient, the effect may
not be clear.
≥ You may not be able to see the face clearly
when recording a distant person. In this case,
cancel soft skin mode or zoom in on the face.
[HDD] [SD]
By focusing only on the subject and blurring the
background, the image can be impressive.
The unit can focus on the subject at a distance of
approx. 50 cm.
¬Rotate the mode dial to select or
.
1 Press the joystick. Then move
the joystick down to display the
icon shown in the illustration.
2 Move the joystick right to select
[].
≥ If the magnification is 10k or less, then it is
automatically set to 10k.
To cancel the tele macro function
Select [ ] again.
≥ If a sharper focus cannot be achieved, adjust
the focus manually. (l 51)
≥ In the following cases, the tele macro function
is cancelled.
jThe zoom magnification becomes lower than
10k.
jThe power is turned off or the mode dial is
operated.
[HDD] [SD]
This function allows you to record colour subjects
in dark locations to stand out against the
background.
Attach this unit to a tripod, and you can record
images free from vibration.
≥ Minimum required illumination: approx. 1 lx
(SDR-H250)/approx. 2 lx (SDR-H20)
≥ Recorded scene is seen as if frames were
missed.
¬Rotate the mode dial to select .
1 Press the joystick. Then move
the joystick down to display the
icon shown in the illustration.
2 Move the joystick up to select
[].
≥ If it is difficult to focus, adjust the focus
manually. (l 51)
Tele macro function
(SDR-H250)
This is for bringing only what you
want to record into focus to take
close-ups.
2/2
2/2
NEXT
NEXT
2/2
NEXT
2/2
2/2
NEXT
NEXT
2/2
NEXT
Colour night view function
This allows recording in dark
locations.
2/2
2/2
NEXT
NEXT
2/2
NEXT
2/2
2/2
NEXT
NEXT
2/2
NEXT
LSQT1211(PAL_ENG).book 47 ページ ２００７年２月１３日 火曜日 午後１時１４分