Filter
Top Products
73
LSQT1211
With other products
Example of images with a 16:9 aspect ratio on
a regular TV (4:3)
≥ This function’s default setting is [16:9].
∫ To display the on-screen
information on the TV
(SDR-H250)
The information displayed on the screen
(operation icon and time code, etc.) can be
displayed on the TV.
Press the EXT DISPLAY button on
the remote control.
≥ Press the button again to erase the
information.
≥ The screen on this unit will not change.
With a DVD recorder
[SD]
If you have a DVD recorder with an SD card slot,
images recorded by this unit can be dubbed onto
the hard disk or a DVD disc.
Refer to the operating instructions of your DVD
recorder for information about whether or not it
supports dubbing from an SD card.
≥ If your DVD recorder does not support dubbing
from an SD card or you want to dub images on
the HDD of this unit, connect this unit and the
DVD recorder with the AV/S cable (supplied)
and then dub.
(l below)
Insert the SD card into the SD card
slot on the DVD recorder, then dub
the contents onto the hard disk or a
disc.
≥ For details on how to dub the images, refer to
the operating instructions of the DVD recorder.
With a VCR
[HDD] [SD]
You can dub images played back on this unit
onto other video devices.
You can create a playlist by gathering the scenes
on the HDD that you want to dub, then dub the
scenes in this playlist only to other devices.
(l 63)
≥ Use the AC adaptor to free you from worrying
about the battery running down.
[TV ASPECT] setting
[16:9] [4:3]
Dubbing recordings onto a
DVD recorder
ZOOM
START/
STOP
PHOTO
SHOT
EXT
DISPLAY
DATE/
TIME
VOL
If you dub images directly from the SD card or
with the AV/S cable and then play them back
on a wide-screen TV, they may be squeezed
horizontally. In this case, refer to the operating
instructions of the device you are dubbing to
or read the operating instructions of the wide-
screen TV and set the aspect setting to 16:9
(Full).
Dubbing images onto other
video devices
LSQT1211(PAL_ENG).book 73 ページ ２００７年２月１３日 火曜日 午後１時１４分