Filter
Top Products
84
LSQT1211
With a computer
SD card
≥ SD-Video format motion pictures are stored in
the [PRG¢¢¢] folder. (“¢¢¢” denotes
base-16 (hexadecimal) characters from 001 to
FFF.)
≥ Up to 99 files can be recorded in the
[PRG¢¢¢] folder.
≥ JPEG format still pictures (IMGA0001.JPG
etc.) are stored in the [100CDPFP] folder.
These can be opened with picture playback
software that supports JPEG pictures.
≥ Up to 999 files can be recorded in the
[100CDPFP] or other such folder.
≥ The DPOF setting files are recorded in the
[MISC] folder (SD card only).
≥ Do not use the computer to delete the SD
card’s folders. Otherwise, it may no longer be
possible for this unit to read the SD card.
≥ Always use this unit to format SD cards.
≥ When data not supported by this unit has been
recorded on a computer, it will not be
recognised by this unit.
≥ You can use Windows Explorer to copy still
picture files to a computer.
1 Double click the icon in task
tray.
Hardware disconnect dialogue appears.
≥ Depending on your computer’s settings, this
icon may not be displayed.
2 Select [USB Mass Storage
Device] and click [Stop].
3 Verify [MATSHITA HDD Cam-HDD
USB Device] or [MATSHITA HDD
Cam USB Device] is selected and
click [OK].
Click [Close], and you can safely disconnect the
cable.
≥ If you disconnect the USB cable while the
ACCESS/PC lamp or card access lamp is on
or while or appears on the LCD
monitor, it may damage the data.
Using the recorded
images on a computer
When ImageMixer3 is used, you can easily
create DVD-Video discs by pressing the unit’s
DVD COPY button.
Among the images recorded on the unit’s HDD,
those scenes which have not yet been copied to
the DVD using this function will be automatically
identified and written onto the DVD.
DVD-Video discs created using this function can
be played back on a DVD player or other device.
¬Connect this unit to the AC adaptor
and turn on the unit.
1 Rotate the mode dial to select
or .
2 Press the DVD COPY button.
≥ “PLEASE CONNECT USB CABLE.” appears
on this unit’s LCD monitor. Connect the USB
cable while this message appears.
Press the DVD COPY button again if the
message disappears.
To disconnect USB cable
safely
DVD COPY function
DVD
COPY
LSQT1211(PAL_ENG).book 84 ページ ２００７年２月１３日 火曜日 午後１時１４分