Filter
Top Products
When the recording memory is full (automatic overwriting):
R In
order to record new images when the recording memory is full, older existing images are
automatically deleted (oldest images deleted first). In this way recorded images do not have to be
manually deleted, and recording can be performed at anytime. You can use the picture protection
setting to prevent images from being deleted (page 18).
Viewing recorded images
Im
ages recorded during monitoring can be viewed with the following procedures:
1 Press MMENUN, then select “PLAY IMAGES” by pressing MDN or MCN.
2 Press M
N (Monitor button) (“O
K”).
R The image with the most recent date and time is displayed first.
R When there is more than 1 image saved, press MFN to view the next image. Each time you press
MFN, images are displayed starting from the most recently recorded image to the oldest recorded
image. If you press MFN when the oldest recorded image is displayed, the most recently recorded
image will be displayed.
R You can hide time and date and the operation assistance by pressing MCN. The assistance is
temporarily hidden, but it is displayed again when an operation is performed.
3 To finish viewing, press M
N (Monitor button) (“O
FF”).
Protecting and deleting pictures
Ho
w to protect images (or remove protection)
1 Press MMENUN while viewing images.
2 Select “SET/REMOVE PROTECTION” by pressing MDN or MCN, then press M
N (Monitor button)
(“O
K”).
R When an image is configured to be protected, a protection symbol “
” is displayed for the
im
age. When the protection setting is removed, the symbol disappears.
How to delete images
1 Press MMENUN while viewing images.
2 Select “DELETE 1 PICTURE” by pressing MDN or MCN, then press M
N
(Monitor button) (“O
K”).
3 Select “YES” by pressing MDN or MCN, then press M
N (Monitor button) (“O
K”).
Note:
R A maximum of 5 images can be protected. If you want to protect an image when 5 images are already
protected, you must remove the protection from 1 of the images.
R Protected images cannot be deleted. Remove the protection in order to delete protected images.
18
How to use