Filter
Top Products
Message Cause & Solution Page
Protected pictures
fu
ll
Can’t protect
pictures
R The maximum number of protected images (5 images) has
a
lready been saved.
– Remove the protection from other images before setting
protection for the current image. Images that had their
protection removed will be deleted in order as new
images are recorded.
18
IN USE
R Another Wireless Monitor is being used.
–
Try again when the other Wireless Monitor is not being
used.
–
CANNOT PAIR
R Pairing procedure was not performed on the Wireless
M
onitor within the specified time (about 2 minutes).
– Perform pairing again from the start after checking the
power and connections for the Wireless Monitor to be
paired.
21
R Y
ou are trying to pair a fifth Wireless Monitor.
–
A maximum of 4 Wireless Monitors can be paired to a
single Base Unit.
CANNOT CONNECT TO
BA
SE
R T
he Wireless Monitor is too far from the Base Unit, or there
i
s an obstruction between the Wireless Monitor and Base
Unit.
– Move the Wireless Monitor to an area closer to the Base
Unit without obstructions between the Wireless Monitor
and Base Unit.
8
29
Help