Panasonic WV-CP500 Security Camera User Manual


  Open as PDF
of 35
 
12
When the SUPER-D5 function is set to "OFF": OFF (1/60) (default), 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, and
1/10 000
When the SUPER-D5 function is set to "ON" or "ON(i-VMD)": OFF (1/60) (default), 1/100
Note:
• When"ALC/ELC"issetto"ELC"or"ALC+"(+page9),"---"appearsandtheelectronicshutterfunctioncannotbeactivated.
• Ifthecontroller,WV-CU254orWV-CU204isused,SWLEDandthestatusof"SHUTTER"arenotcorrectlydisplayed.
4. Gain control setting [AGC]
Selectagaincontrolsettingfromthefollowing.
ON (HIGH) (default)/ON (MID)/ON (LOW):Automaticallyincreasesthegaintomakethescreenbrighterwhentheilluminanceof
thesubjectbecomesdarker.
 HIGH,MIDandLOWindicatethegainlevel.
OFF:Doesnotincreasethegain.
Note:
• When"SENSUP"issettotheAUTOmode,“AGC”cannotbesetto“OFF”.
5. Electronic sensitivity enhancement setting [SENS UP]
UseoftheelectronicsensitivityenhancementfunctionincreasesthequantityoflightstoredontheCCD,andaccordinglythe
imagebecomesbrighter.ThemagnificationisunchangedforselectionofFIX,andthemagnificationischangeableinaccor-
dancewiththeilluminanceofaphotographicsubjectforselectionofAUTO.
Themagnificationoftheelectronicsensitivityisselectablefromthefollowing.ThesettingoftheSUPER-D5functionrestrictsthe
availablesettingrange.
When the SUPER-D5 function is set to "OFF":OFF(default)/X2AUTO/X4AUTO/X6AUTO/X10AUTO/X16AUTO/X32AUTO/
OFF/X2FIX/X4FIX/X6FIX/X10FIX/X16FIX/X32FIX
When the SUPER-D5 function is set to "ON" or "ON (i-VMD)":OFF(default)/X2AUTO/X4AUTO/X6AUTO/X10AUTO/X16
AUTO/X32AUTO
Note:
• When"ALC/ELC"issetto"ELC"or"ALC+"(+page9),or"SHUTTER"issetto"1/100"(+page11),onlytheAUTOmodeis
enabled.
• When"SHUTTER"issetto"OFF"orotherthan"1/100",theelectronicsensitivityenhancementsettingcannotbeperformed.
"---"appearsand"OFF"isselected.
• Itisimpossibletoselect"AUTO"for"SENSUP"and"1/100"for"SHUTTER"usingthefollowingsystemcontroller.Usethe
operationbuttonsforthesetting.
 WV-CU300,WV-CU354,WV-CU204,WV-CU254
• Whenthemagnificationof"SENSUP"isincreased,thescreenbecomescoarser,morewhitish,ormoreflawed.However,this
phenomenonisnormal.
• Ifthecontroller,WV-CU254orWV-CU204isused,SWLEDandthestatusof"SENSUP"arenotcorrectlydisplayed.
6. White balance setting [WHITE BAL]
Thewhitebalanceadjustmentisselectablefromthefollowing.
ATW1 (default):Activatestheautomaticcolortemperaturetrackingmode.Thecameracontinuouslymeasuresthecolortem-
peratureofthelightsourceandautomaticallyadjuststhewhitebalance.Theadjustmentofthecolortemperatureranges
fromapprox.2700Kto6000K.
 previous next