Panasonic WV-CP500 Security Camera User Manual


  Open as PDF
of 35
 
16
9. i-VMD setting [i-VMD]
The intelligent motion detection function allows the camera to detect motion and appearance/disappearance of an object or
scene change with the camera. Detection of motion and appearance/disappearance of an object or scene change with the
camera can be announced by issuing an alarm signal or displaying a frame on the screen.
Important:
• Thefollowingcircumstancesmayresultindetectionfailureorfalsedetection:Adjustingthedetectionareaandsensitivity
may cause detection failure.
• Notenoughdifferenceinbrightnessbetweenthebackgroundandthemovingphotographicsubject,orsignificant
changes in brightness
• Dirtorwaterdropsonthelens
• Insufficientbrightness,forexample,whenshootingatnight
• Thesubjectismovingstraightatthecamera
• Thesubjectismovingtoofastortooslow
• Thesubject is too small or too large
• Therearetoomanymovingobjects
• Lightreflectedthroughawindoworfromaroadsurface
• Thecameraisshaking
• Entryofoutsidelight,suchassunlightortheheadlightsofacar
• Flickeringfluorescentlight
• Scene change detection may fail in the following cases:
• Thelensispartiallycoveredorcoveredwithatransparentitem
• Thephotographicsubjectsbeforeandafterchangingthecameradirectionaresimilar
• False detection may occur for approx. 1 minute after turning on the power, after completing settings in the SETUP menu, or
after changing the camera view angle.
Perform the settings relating to the motion detection
Perform the settings relating to the motion detection as follows. It is possible to detect only objects that moves to the direction
specified in advance or objects that keeps on moving for a certain duration. Up to 4 motions can be simultaneously detected.
Follow the procedure below.
Step 1
Move the cursor to "i-VMD" and press the setting button.
→ The "i-VMD SETUP" screen appears.
Step 2
Move the cursor to "MOTION DET" and press the setting button.
→ The "MOTION DET" screen appears.
Step 3
The setting of the motion detection mode is performed. This unit has 3 types of motion deteciton modes.
"SENSITIVITY" screen
**SENSITIVITY**(1)
SENSITIVITY LOW
MIN SIZE OFF
RET TOP END
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(HIGH)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH
BW MODE AUTO1
i-VMD
RET TOP END
"i-VMD SETUP" screen"CAMERA SETUP" screen
**i-VMD SETUP**(1)
MOTION DET
OBJECT DET OFF
SCENE CHANGE OFF
INDICATOR OFF
ALARM CONT
RET TOP END
"MOTION DET" screen
**MOTION DET**(1)
MOTION OFF
LOITERING OFF
DIRECTION OFF
AREA ALL
SENSITIVITY
RET TOP END
 previous next