Filter
Top Products
8
Camera operation setting [CAMERA SETUP]
The following describes the camera operation settings. The following settings can be configured on the "CAMERA SETUP"
screen displayed from the top screen.
Refer to page 5 for how to call up the screen.
The settings configured on the "CAMERA SETUP" screen will be saved as a scene file.
1. Register a scene file [SCENE1/SCENE2]
It is possible to register 2 patterns of scene file. For example, when different settings are to be applied between day and night,
SCENE1 can be applied in the daytime and SCENE2 at night.
Change between the scene files can be made on the ALARM IN setting or shortcut operation. (+ Pages 23 and 24)
"SCENE1" is set as the default setting.
Step 1
After confirming that "SCENE1" is selected, configure the settings of "ALC/ELC" through "i-VMD". (☞ Pages 9 - 20)
When using while changing the scene files, go to step 2.
Step 2
Move the cursor to "SCENE1" and use the right or left button to select "SCENE2".
→ The "COPY(SCENE1)" screen will be displayed.
Step 3
To configure the settings of "SCENE2" using the settings of "SCENE1", press the setting button after moving the cursor to
"COPY(SCENE1)".
→ The settings of "SCENE1" will be copied to "SCENE2".
Step 4
Edit the settings to be changed and saved as the settings of "SCENE2".
The number displayed at the right side of the title on each setting screen
inidicates a scene file number.
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(HIGH)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH
BW MODE AUTO1
i-VMD
RET TOP END
q
w
e
r
t
y
u
i
o
"CAMERA SETUP" screen
Screen when "SCENE1" is selected Screen when "SCENE2" is selected
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(HIGH)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH
BW MODE AUTO1
i-VMD
RET TOP END
**CAMERA SETUP**
SCENE2
ALC/ELC ALC
SHUTTER OFF
AGC ON(HIGH)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH
BW MODE AUTO1
i-VMD
COPY(SCENE1)
RET TOP END
**ALC CONT**(1)
BACK LIGHT COMP
SUPER-D5 ON
LEVEL
...
|
... 0
- +
MANUAL ABS
RET TOP END
Scene file
number