-18-
■ Preset Menu
● Preset Menu Display
1. Displaying the preset menu directly
(1) Move the cursor to PRESET 1
O and select the
position number with the joystick.
(2) Press the CAM (SET) key.
The preset setting menu appears on the monitor
screen.
2. Displaying the preset menu from the PRESET NUM-
BER SET menu
(1) Move the cursor to MAP
O and press the CAM
(SET) key.
The PRESET NUMBER SET menu appears on the
monitor screen.
(2) Move the cursor to the position number to be set
and press the CAM (SET) key.
The preset setting menu appears on the monitor
screen. To display any position number between 33
and 64, move the cursor to "33-64" in the lower left of
the screen and press the CAM (SET) key.
Notes:
• The * mark indicates that the position number
has been preset.
• The character H refers to the home position.
• The second line from the bottom shows the pre-
set ID corresponding to the selected number.
"DOOR" next to "ID" in the example shown right is
for preset position number 1.
• Preset numbers 1 to 4 are linked to alarm inputs
1 to 4 respectively. If alarm input 1 comes in, the
camera turns to preset position 1, and to other
positions according to alarm input 2, 3 or 4.
● Position Setting (POSITION SET)
1. Move the cursor to POSITION SET on the preset set-
ting menu and press the CAM (SET) key.
The position setting menu appears.
2. To Set Panning/Tilting Positions
(1) For PAN/TILT, move the cursor to PUSH SET and
press the CAM (SET) key. The PAN/TILT setting
menu appears.
(2) Select panning/tilting positions with the joystick, and
press the CAM (SET) key.
The positions are set and the screen returns to the
position setting menu.
PRESET NO. 1
