Filter
Top Products
Pin no.
Copper wire size
(AWG)
CONNECTIONS
How to Assemble the Cable with the Accessory
Connector
Strip back the cable jacket approx. 3 mm (0.1 inch) and
separate the individual conductors.
Prepare the individual conductors for clamping. Use
MOLEX band tool part number 57027-5000 (for UL-
Style Cable UL1015) or 57026-5000 (for UL-Style
UL1007) for clamping the contacts.
After clamping the contacts, push them into the proper
holes in the accessory connector of this camera until
they snap in place.
CAUTIONS
• Shrinking the cable-entry seal is a one-time proce-
dure. Do not shrink the cable-entry seal until it has
been ascertained that the unit is functioning.
• CONNECT THIS TO 24V AC CLASS 2 POWER SUP-
PLY ONLY.
-51-
Precautions
• The following connections should be made by qualified service personnel or system installers in accordance
with all local codes.
• Switch the 24 V AC power source off before installation and connection.
Note: When powered up, the unit performs a self-check (including one panning, tilting, zooming and focusing opera-
tion).
Recommended wire gauge sizes for 24 V AC line
#24
(0.22mm
2
)
Length
of cable
(approx.)
(m)
(ft)
#22
(0.33mm
2
)
#20
(0.52mm
2
)
#18
(0.83mm
2
)
20 30 45 75
65 100 160 260
Power source
1
2
3
4
24 V AC LIVE
24 V AC NEUTRAL
Ground
Not use
1
3
2
4
• 24 V AC Power Supply Connection
Accessory Connector Information
Contact
Insert
Up
A
Approx.
3 mm (0.1 inch)
Insert the wire until A position
and clamp the contacts.
Wire
Up
Contact
Wire
Approx.
3 mm (0.1 inch)
Insert the wire until A position
and clamp the contacts.
Contact
Up
Wire
Up
Wire
Contact
To VIDEO IN
(CAMERA IN)
Video output
24 V AC
BNC plug
Coaxial cable
RS485 cable
Data port
BNC plug
Alarm in
Alarm out
To sensors
To indicators
24 V AC cable for Camera
24 V AC cable for Heater
✻ The coaxial cable length (RG-6/U, 5C-2V) for the connection is up to
1 200 meters (4 000 ft.)