Panasonic WV-NP502 Series Security Camera User Manual


 
Default: 5 Normal
*1
SW352
SW352
SF342
SF342
SP302
SP302
SW152
SW152
*2
SW355
SW355
SF346
SF346
SF335
SF335
SW316L
SW316L
SW316
SW316
SW314
SW314
SP306
SP306
SP305
SP305
SW155
SW155
SF135
SF135
SP105
SP105
NP502
NP502
SW115
SW115
13.3 Configure the settings relating to H.264
recording [Alarm] (SW355, SW352, SF346, SF342,
SF336, SF335, SF332, SW316L, SW316, SP306,
SP305, SP302, SW155, SW152, NP502, NW502S,
SW115)
Click the [Alarm] tab on the “Alarm” page. (®page 42, page 44)
The settings relating to the recording H.264 data on the SD memory card when an alarm is detected can be
configured on this page. To operate recording, it is necessary to configure the settings relating to SD memory
card and the video data. (®page 53)
H.264 recording (SD memory card)
[Pre alarm]
Determine whether or not to perform the pre alarm recording. When “Use” is selected, approx. 1 MB image
data is always saved during the pre alarm recording.
Use/ Not use
Default: Not use
[Post alarm (recording) duration]
Set the duration to save image data on the SD memory card after an alarm occurrence.
10s/ 20s/ 30s/ 40s/ 50s/ 60s/ 120s/ 180s/ 240s/ 300s
Default: 30s
* The actual recording time may sometimes be longer than the duration selected for this setting.
[Recording (memory) size per an alarm]
The capacity of the SD memory card used to record video data upon an alarm occurrence. The actual capacity
may be different.
IMPORTANT
To record H.264 data, it is required to select “Use” for “SD memory card” on the [SD memory card] tab.
In addition, it is required to select “H.264” for “Recording format”. (®page 53)
Operating Instructions 139
13 Configure the alarm settings [Alarm]