Panasonic WV-NP502 Series Security Camera User Manual


 
Note
SW355
SW355
SW352
SW352
SF346
SF346
SF342
SF342
SF335
SF335
SW316L
SW316L
SW316
SW316
SP306
SP306
SP305
SP305
SP302
SP302
SW155
SW155
SW152
SW152
NP502
NP502
SW115
SW115
:
Notification E-mail will be sent with the message “The capacity of the SD memory card is full.” when
the SD memory card has become full, or “The SD memory card cannot be detected.” when mounting
of the SD memory card failed.
13.8 Configure the settings relating to Panasonic
alarm protocol [Notification]
Click the [Notification] tab on the “Alarm” page. (®page 42, page 44)
The settings relating to Panasonic alarm protocol can be configured in this section.
Panasonic alarm protocol notification
[Panasonic alarm protocol]
Select “On” or “Off” to determine whether or not to provide notification by Panasonic alarm protocol according
to the settings for the “Alarm” and “Diag.” checkboxes of “Destination of notification” below.
When an alarm is detected (“Alarm”)
SW355
SW355
SW352
SW352
SF346
SF346
SF342
SF342
SF335
SF335
SW316L
SW316L
SW316
SW316
SP306
SP306
SP305
SP305
SP302
SP302
SW155
SW155
SW152
SW152
NP502
NP502
SW115
SW115
:
When a notification of the remaining capacity of the SD memory card has been provided (“Diag.”)
When the SD memory card has become full (“Diag.”)
When the SD memory card cannot be recognized (“Diag.”)
Default: Off
Operating Instructions 147
13 Configure the alarm settings [Alarm]