Filter
Top Products
10
Precautions
Refer installation work to the dealer.
Installation work requires technique and
experiences. Failure to observe this may
cause fire, electric shock, injury, or damage
to the product.
Be sure to contact the dealer for installation,
relocation and power supply work.
Stop the operation immediately when
something is wrong with this product.
When smoke goes up from this product or
the smell of smoke comes from this product,
stop the operation immediately and contact
your dealer.
Turn the power off immediately and contact
qualified service personnel for service.
Do not attempt to disassemble or modify
this product.
Failure to observe this may cause fire or elec-
tric shock.
Consult the dealer for the repair or inspec-
tions.
Do not insert any foreign objects.
This could permanently damage this product.
Turn the power off immediately and contact
qualified service personnel for service.
Select an installation area that can sup-
port the total weight.
Selecting an inappropriate installation sur-
face may cause the product to fall down or
topple over, resulting in injury.
Installation work shall be started after suffi-
cient reinforcement.
Periodic inspections shall be conducted.
Rust on the metal parts or screws may cause
a fall of the product resulting in injury or acci-
dents.
Consult the dealer for the inspections.
Do not use this product in an inflammable
atmosphere.
Failure to observe this may cause an explo-
sion resulting in injury.
Avoid installing this bracket in the loca-
tions where salt damage occurs or corro-
sive gas is produced.
Otherwise, the mounting portions will deterio-
rate and accidents such as a fall of this prod-
uct may occur.
Install this product at a vibration-free
place.
Failure to observe this may cause accidents
including falling.
Failure to observe this may cause screws
and bolts to be loosened resulting in injury
due to their falling.
The installation place shall be high
enough not to interfere with people or
object moving.
Failure to observe this may cause accidents
including falling.
Do not strike or give a strong shock to this
product.
Failure to observe this may cause injury or
fire.
Turn off the power before wiring.
Failure to observe this may cause electric
shock. In addition, a short circuit or wrong
wiring may cause fire.
The exclusively designed mount bracket
shall be used.
Failure to observe this may cause a drop
resulting in injury or accidents.
Use the exclusively designed mount bracket
for installation.
The screws and bolts shall be tightened to
the specified torque.
Failure to observe this may cause a drop
resulting in injury or accidents.
Do not rub the edges of metal parts with
your hand.
Failure to observe this may cause injury.