Filter
Top Products
• When “16:9” is selected for the aspect ratio of JPEG/H.264, the image will be displayed clipped from
the image of “4:3”. Therefore even when “16:9” is set, the brightness of the masked area will affect the
image. It is recommended that the aspect ratio should be once set to “4:3” before masking.
A
B
C
A. Image in the aspect ratio of “4:3”
B. Areas where the image is not displayed when
“16:9” is selected for the aspect ratio
C. Image in the aspect ratio of “16:9” (Being cut
out from the aspect ratio of 4:3)
Note
• When the [Reset] button is clicked, masking for all the masked areas will be canceled.
Operating Instructions 119
11 Configure the settings relating to images and audio [Image/Audio]