Panasonic WV-SF330 Series Security Camera User Manual


 
This function is only displayed when [Terminal 3] is set to [AUX output] on the settings menu.
(®page 135)
Note
You can change the image size displayed on the mobile terminal by accessing the following addresses.
Large display: http://IP address/cam/dl
Medium display: http://IP address/cam/dm
Small display: http://IP address/cam/ds
When the resolution is changed by the resolution control, the displayed resolution changes but the
image size remains the same.
When the HTTP port number is changed from “80”, enter “http://IP address: (colon) + port number/
cam”
*1
in the address box of the browser. When using the DDNS function, access to “http://Host name
registered in the DDNS server: (colon) + port number/cam”
*2
.
When “HTTPS” is set in “HTTPS” - “Connection” on the [Network] tab of the “Network” page, enter the
following:
“https://IP address: (colon) + port number/cam” or “https://Host name registered in the DDNS server:
(colon) + port number/cam”.
When the authentication window is displayed, enter the user name of an administrator or user and
password. Depending on the mobile terminal in use, password entry may be required each time the
screen is switched.
It is impossible to transmit/receive audio using a mobile terminal.
Depending on the mobile terminal in use, larger size images may not be displayed. In this case,
selecting “9 Low” for “Image quality setting” of “JPEG” (®page 77) may sometimes solve this
problem.
24 Operating Instructions
2 Monitor images on a cellular phone/mobile terminal