Panasonic WV-SF330 Series Security Camera User Manual


 
[Video encoding format]
SW355
SW355
SW352
SW352
SF346
SF346
SF342
SF342
SF335
SF335
SW316L
SW316L
SW316
SW316
SW314
SW314
SP306
SP306
SP305
SP305
SP302
SP302
NP502
NP502
Select MPEG-4 for a video format.
H.264: H.264 will be set for the video encoding format. The subsequent setting items will be for H.264.
(®page 79) The tab name will be changed to [JPEG/H.264].
MPEG-4: MPEG-4 will be set for the video encoding format. The subsequent setting items will be for
MPEG-4.
The tab name will be changed to [JPEG/MPEG-4].
Default: H.264
MPEG-4(1) / MPEG-4(2)
[MPEG-4 transmission]
Select “On” or “Off” to determine whether or not to transmit MPEG-4 images.
On: Transmits MPEG-4 images.
Off: Does not transmit MPEG-4 images.
Default: On
IMPORTANT
When “16:9” is selected for “Aspect ratio”, MPEG-4 transmission is unavailable.
When “H.264” is selected for “Recording format”, MPEG-4 transmission is unavailable.
Note
When “On” is selected for “MPEG-4 transmission” in “MPEG-4(1)” or “MPEG-4(2)”, displaying of
MPEG-4 images or JPEG images on the “Live” page will be available.
When “On” is selected for “MPEG-4 transmission” in “MPEG-4(1)” and “MPEG-4(2)”, MPEG-4 images
are viewable using other devices with each setting.
When “On” is selected for “MPEG-4 transmission” in “MPEG-4(1)” or “MPEG-4(2)”, the transmission
interval of JPEG images may be longer.
[Internet mode (over HTTP)]
Select “On” when transmitting MPEG-4 images via the Internet. It is possible to transmit MPEG-4 images
without changing the broadband router settings configured for JPEG image transmission.
On: MPEG-4 images and audio will be transmitted using the HTTP port. Refer to page 166 for further
information about the HTTP port number settings.
Off: MPEG-4 images and audio will be transmitted using the UDP port.
Default: Off
Note
When “On” is selected, only “Unicast port (AUTO)” will be available for “Transmission type”.
When “On” is selected, it may take seconds to start displaying MPEG-4 images.
When “On” is selected, MPEG-4 images may not be displayed depending on the number of the
concurrent access users and audio data availability, etc.
When “On” is selected, only IPv4 access is available.
[Image capture size]
Select “QVGA” or “VGA” for the image capture size of MPEG-4 images.
Default:
MPEG-4(1): VGA
MPEG-4(2): VGA
88 Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]