Panasonic WV-SF330 Series Security Camera User Manual


 
0.2s/ 0.25s/ 0.33s/ 0.5s/ 1s/ 2s/ 3s/ 4s/ 5s
Default: 1s
[Transmission type]
Select the transmission type of MPEG-4 images from the following.
Unicast port (AUTO): Up to 14 users can access a single camera concurrently. “Unicast port1(Image)”
and “Unicast port2(Audio)” will automatically be selected when transmitting images and audio from the
camera. When it is unnecessary to fix the port number for MPEG-4 image transmission such as when using
in a particular LAN environment, it is recommended to select “Unicast port (AUTO)”.
Unicast port (MANUAL): Up to 14 users can access a single camera concurrently. It is necessary to select
“Unicast port1(Image)” and “Unicast port2(Audio)” manually to transmit images and audio from the camera.
It is possible to fix the port number of the router used for MPEG-4 image transmission via the Internet by
setting “Unicast port (MANUAL)” (®page 163). Refer to the operating instructions of the router in use.
Multicast: Unlimited number of users can access a single camera concurrently. Complete the entry field
of “Multicast address”, “Multicast port” and “Multicast TTL/HOPLimit” when transmitting MPEG-4 images
with multicast.
* Refer to page 9 for further information about the maximum concurrent access number.
Default: Unicast port (AUTO)
[Unicast port1(Image)]
*1
SW355
SW355
SW352
SW352
SF346
SF346
SF342
SF342
SF335
SF335
SW316L
SW316L
SW316
SW316
SP306
SP306
SP305
SP305
SP302
SP302
NP502
NP502
/[Unicast port]
*1
SW314
SW314
Enter the unicast port number (used to transmit images from the camera).
Available port number: 1024-50000 (Only even numbers are available.)
Default:
MPEG-4(1): 32004
MPEG-4(2): 32014
[Unicast port2(Audio)]
*1
SW355
SW355
SW352
SW352
SF346
SF346
SF342
SF342
SF335
SF335
SW316L
SW316L
SW316
SW316
SP306
SP306
SP305
SP305
SP302
SP302
NP502
NP502
Enter the unicast port number (used to transmit audio from the camera).
Available port number: 1024-50000 (Only even numbers are available.)
Default:
MPEG-4(1): 33004
MPEG-4(2): 33014
[Multicast address]
*2
Enter the multicast IP address. Images and audio will be transmitted to the designated IP address.
Available IPv4 address: 224.0.0.0 - 239.255.255.255
Available IPv6 address: Multicast address starting with “FF”
Default:
MPEG-4(1): 239.192.0.20
MPEG-4(2): 239.192.0.21
Note
Enter a multicast IP address after checking available multicast address.
[Multicast port]
*2
Enter the multicast port number (used to transmit images from the camera).
Available port number: 1024 - 50000 (Only even numbers are available.)
Default: 37004
90 Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]