Panasonic WV-SP105E Security Camera User Manual


  Open as PDF
of 64
 
18
18
19
[OSD position]
Select the position where the time and date and a char-
acter string to be displayed on the image of the "Live"
page.
Upper left: The above information will be displayed at
the upper left corner of the main area on the "Live"
page.
Lower left: The above information will be displayed at
the lower left corner of the main area on the "Live"
page.
Upper right: The above information will be displayed at
the upper right corner of the main area on the "Live"
page.
Lower right: The above information will be displayed at
the lower right corner of the main area on the "Live"
page.
Default: Upper left
[Brightness status display]
Select"On"or"Off"todeterminewhetherornottodis-
play the status of brightness on images displayed on
the "Live" page when adjusting brightness.
Default:On
[Link/Access indicator]
Determine whether or not to use the following indica-
tors.Select"On"tousethefollowingindicatorsto
check the operational status by lighting them.
Select"Off"toturnofftheindicatorsatalltimes.
•Powerindicator
•Linkindicator
•Accessindicator
Default:On
Note:
•Power indicator (green):
This indicator will light when the power is on.
•Link indicator (orange):
This indicator will light when communication with
the connected device is available.
•Access indicator (Green):
This indicator will light when accessing a network.
[Alarm status update mode]
Select an interval of the camera status notification from
the following.
When the status of the camera changes, the alarm
occurrence indication button will be displayed to notify
of the camera status.
Polling(30sec): Updates the status each 30 seconds
and provide notification of the camera status.
Real time: Provide notification of the camera status
when the status has changed.
Default: Real time
Note:
•Dependingonthenetworkenvironment,notification
may not be provided in real time.
[Alarm status reception port]
When selecting "Real time" for "Alarm status update
mode", designate a port number to which the status
change notification is to be sent.
Refer to the help window to infomation about the
unavailable port number.
Available port number: 1 - 65535
Default: 31004
[Automatic installation of viewer software]
Determine whether or not to install the viewer software
from this camera.
On: Installs the viewer software from the camera auto-
matically.
Off: The viewer software cannot be installed from the
camera.
Default:On
Important:
•Itisimpossibletodisplayimageswhentheviewer
software "Network Camera View 4S" is not installed
on the PC.
•Thenumberoftheviewersoftwareinstallationscan
be checked on the [Upgrade] tab of the
"Maintenance" page.
 previous next