Panasonic WV-SP105E Security Camera User Manual


  Open as PDF
of 64
 
54
54
55
Upgrade the firmware [Upgrade]
Click the [Upgrade] tab of the "Maintenance" page. (☞Pages13and14:Howtodisplay/operatethesetupmenu)
The current firmware can be checked and upgraded to the latest version on this page. Contact the dealer for further
information about the firmware upgrade.
[Model no.], [MAC address], [Serial no.], [Firmware
version], [IPL version], [HTML version], [IP address
(IPv6)], [Viewer software installation counter]
Information of each item will be displayed.
Step 1
Contact the dealer and download the latest firmware
onto a PC.
Important:
•Ablank(space)cannotbeusedforthenameofthe
directory where the downloaded firmware to be
saved.
Step 2
Click the [Browse...] button and designate the down-
loaded firmware.
Step 3
Click the radio button respective to the desired option
to determine whether or not to initialize the settings
after completing the firmware upgrade.
Note:
•Notethatthesettingscannotberestoredafteran
initialization is operated.
Step 4
Click the [Execute] button.
→ The confirmation window will be displayed. When
"Do not reset the settings to the default after the
upgrade." is selected, the confirmation window will
not be displayed.
Important:
•Aftercompletingtheupgrade,deletetemporary
internet files. (☞ Page 61)
•UpgradethefirmwareusingaPCinthesamesub-
net as the unit.
•Followtheinstructionsfromthedealerwhen
upgrading the firmware.
•Usethedesignatedfile(extension:img)forthefirm-
ware upgrade.
•Usethedesignatedfile,sp105_xxxx.img,forthe
firmware upgrade.
* ("xxxxx" indicates the version of the firmware.)
•Donotturnoffthepowerofthecameraduringthe
upgrade process.
•Donotperformanyoperationduringupgradingand
wait until it completes.
•Thefollowingnetworksettingswillnotbereset
when upgrading the firmware after selecting "Reset
the settings to the default after completing the
upgrade. (Except the network settings)".
On/OffforDHCP,IPaddress,subnetmask,default
gateway, HTTP port, line speed, bandwidth control
(bitrate),time&date
•TheviewersoftwareusedoneachPCshouldbe
licensed individually. Refer to your dealer for the
software licensing.
 previous next