Panasonic WV-SP105E Security Camera User Manual


  Open as PDF
of 64
 
6
6
7
Important:
• Toenhancethesecurity,changethepasswordfortheusername"admin".Itisrecommendedtochangethis
password periodically.
• WhendisplayingmultipleH.264imagesonaPC,imagesmaynotbedisplayeddependingontheperformance
of the PC.
Note:
• Themaximumnumberofconcurrentaccessuseris14includinguserswhoisreceivingH.264imagesandusers
who are receiving JPEG images. Depending on the set values for "Bandwidth control(bit rate)" and "Max bit rate
(per client)*", the maximum concurrent access number may be less than 14 users. When 14 users are concur-
rently accessing, the access limit message will be displayed for users who subsequently attempt to access.
When "Multicast" is selected for "Transmission type" of "H.264", only the first user who accessed to monitor
H.264 images will be included in the maximum number.
• When"On"isselectedfor"H.264transmission"(☞page20),H.264imageswillbedisplayed.When"Off"is
selected,aJPEGimagewillbedisplayed.ItispossibletodisplayaJPEGimageevenwhen"On"isselectedfor
"H.264 transmission". In this case, the refresh interval of JPEG images will be limited to 5 fps.
• Therefreshintervalmaybecomelongerdependingonanetworkenvironment,PCperformance,photographic
subject, access traffic, etc.
<Refresh interval of JPEG images>
 When"On"isselectedfor"H.264transmission":Max.5fps
 When"Off"isselectedfor"H.264transmission":Max.30fps
 previous next