16 C2462M-D (3/08)
Camera Adjustments
SWITCH SETTINGS
SWITCH SETTINGS FOR FIXED FOCAL LENGTH LENS WITHOUT
AUTO IRIS
Refer to the switch drawing. The switch is located next to the lens. Automatic backlight compensation
(factory setting) is used under varying lighting conditions (such as outdoors) or fixed lighting conditions
where there are no bright spots that darken other picture details. Manual backlight compensation is used
in fixed lighting conditions, to optimize the picture detail when there are bright spots.
• ALC/ELC switch: Always ELC
• Y/DC switch: Not used
• Auto backlight compensation: BLC switch OFF ABL switch ON
• Manual backlight compensation: BLC switch ON ABL switch OFF
NOT USED
= SWITCH POSITION
FACTORY SETTINGS
ALC
Y
BL
ABL
ELC
DC
OFF
OFF
ON
OFF