Pelco 90 Security Camera User Manual


 
18 C2462M-D (3/08)
Reinstall the Dome Bubble
DOME LINER INSTALLATION
If the unit is supplied with a dome liner, reinstall the liner before installing the dome bubble. To install the
liner, refer to Figure 11 complete the following steps:
1. Align the studs located on the camera module with the clips on the liner.
2. Lightly pinch the sides of the liner, opposite from the clips, and place the clips over the studs.
3. Once the liner is secure, position the viewing window of the liner over the lens of the camera.
4. Install the bubble.
Figure 11. Installing the Dome Liner