Filter
Top Products
24 C3432M-G (4/09)
DN/CH SERIES ADJUSTMENTS
Figure 17. Adjusting the IP110-DN/CH Series Camclosure
Refer to Figure 17 to adjust the IP110-DN or IP110-CH model.
SWITCH SETTINGS
Locate the DIP switch. Then set the switches for your installation.
SW4-1: Auto Gain Control
The automatic gain control (AGC) adjusts the image automatically to compensate for changes in light
levels.
Set SW4-1 to ON to enable AGC. Set it to OFF to
disable AGC. The default setting is ON.
SW4-2: Backlight Compensation
The backlight compensation (BLC) feature compensates for backlit scenes by enhancing objects in the
center of the scene.
Set SW4-2 to ON to enable BLC. Use this setting if a b
right backlight is present and the subject in the
center of the picture appears dark or as a silhouette.
Set it to OFF to disable backlight compensation.
This is the default setting.
SW4-3: N/A