Filter
Top Products
C3432M-G (4/09) 31
Install Dome and Trim Ring
Figure 22. Dome Liner Adjustment
1. To adjust the dome liner (refer to Figure 22):
a. Align the screw holes in the trim ring with those in the back box to identify the proper dome
liner positio
n.
b. Loosen the three Phillips screws located in the trim ring.
c. Insert the blade of a standard screwdriver in one of the adjustment groo
ves. Rotate the dome
liner to position the viewing window over the camera lens.
d. Tighten the three Phillips screws to lock the dome liner in
place.
2. Align the screw holes in the trim ring with those in the back box.
3. Tighten the tamper-resistant screws through the trim ring
into the back box. Use the 1/8-inch hollow
screwdriver bit (supplied).
LOOSEN SCREWS
ADJUSTMENT
GROOVE
LINER