Filter
Top Products
16 C4601M-C (7/11)
Verifying Operation
1. Using one of the keys that came with the unit, open the bezel by swinging it on its hinge away from the front of the unit.
2. Turn on the Endura workstation by momentarily pressing the black power button on the front of the unit (refer to Figure 12).
3. Close the front bezel.
Figure 12. Front Panel Indicators (Bezel Open)
4. Check the front panel indicators (refer to Front Panel Indicators on page 17):
• The Pelco badge on the front panel should glow blue if the bezel is closed and the power is on. If the bezel is open, the power indicator
should glow white.
• The unit status indicator should glow solid green after the unit starts.
• The network activity indicator shows the network connection speed and status.
NOTE: The white configuration/reset button is reserved for future use (refer to Figure 12).
WARNING: Pressing and holding the power button for four seconds will shut down the unit. Do not shut down the unit in this manner
unless the unit does not shut down properly through the Windows operating system.
03267-39-0020
SN
POWER BUTTON
DVD/CD
DRIVE
POWER
INDICATOR
PRODUCT SERIAL NUMBER STICKER
NETWORK
ACTIVITY
UNIT STATUS
CONFIGURATION/
RESET BUTTON
USB 2.0 PORT