C4601M-C (7/11) 7
Before You Begin
Endura is a network system that requires a continuous amount of bandwidth to transmit true, live video. Therefore, always include your network
administrator when planning and installing Endura components.
You will also need the following items:
• Access to an Endura network
– that is an active, Gigabit Ethernet network that supports the full Internet Protocol suite,
– that is configured with at least one Endura video recorder,
– that is configured with at least one SM5000 system manager
• One or more monitors (1280 x 1024 VGA or DVI)
• Phillips screwdriver (if mounting the unit into a rack)
• Cat5e (or better) network cable
PARTS LIST
Qty Description
1 Pelco Endura workstation with software installed
1 Standard PC USB keyboard
1 Standard USB mouse
1 Rack-mounting kit:
2 Chassis mounting brackets with handles and thumb screws
8 Screws, 10-32 x 0.25-inch, Phillips pan head (4 for each bracket)
2 Adjustable support rail sets (each set includes 1 front-mounting rail and 1 rear-mounting rail)
6 Screws, 8-32 x 0.375-inch, Phillips truss head
4 Screws, 10-32 x 0.5-inch, Phillips flat head (2 for each front-mounting rail)
4 Screws, 10-32 x 0.75-inch, Phillips pan head (2 for each rear-mounting rail)
10 Cage nuts (for use with square-hole racks)
2 DVI-to-VGA video adapter
1 Power cord either 1 USA standard, 1 European standard, or 1 UK standard (Units shipped to China do not include power cords.)
2Keys
3 Product identification labels (attached to unit)
1 WS5070 Endura Workstation Installation manual (C4601M)
1 WS5000 Advanced System Management Software Operation manual (C4607M)
1 WS5070 Endura Workstation Quick Start Guide (C4608M)
1 Important Safety Instructions (C1626M)
1 Endura Installation and Programming Checklist (C1678M)
1 Resource Disc
1 Recovery Disc
1Windows
®
7 Ultimate 64-bit Version Installation Disc