Filter
Top Products
18 C4601M-C (7/11)
Updating the Software
The software is updated frequently as Pelco continues to refine and enhance the system, and the latest software might not be available at the
time the Endura workstation is shipped. It is therefore recommended that you visit the Certified Partner Portal at the Pelco Web site
(www.pelco.com) periodically to confirm that the unit contains the latest version of the software. After you download any update, refer to
Installing the Software for further instructions on updating the unit.
INSTALLING THE SOFTWARE
1. Close the software if it is running.
2. In Windows Explorer, locate the folder where you downloaded the updated version of the software, and then double-click the setup
program. The program prepares the installation files and displays the Welcome screen (Figure 15).
Figure 14. Locating and Starting the Installation Program
Figure 15. Installation Welcome Screen
3. Follow the instructions on the installation screens to install the software.
WARNING: Do not use the Add/Remove Programs feature of Microsoft
®
Windows to remove an existing version of the software. The
updated software depends on components and settings that are present in the existing version. The installation program will remove
the existing software as the newer version is installed.