Filter
Top Products
139
3
Playing Back and Deleting Images
3
Connect the other ends of the AV cable to the video and
audio input terminals of the AV equipment.
When using stereo sound equipment, insert the sound connector into
the L (white) terminal.
4
Turn the AV equipment on.
When the equipment that the camera is connected to and the equipment
that plays back images are different, turn both on.
When viewing images on AV equipment with multiple video input
terminals (such as a TV), refer to the operation manual of the
equipment
and select the video input terminal to which the camera is
connected.
5
Turn the camera on.
• The video output format differs depending on the region. When you set
[Select Time] in the World Time setting (p.174) to X (Destination), the
video output setting changes to the video output format for that city.
• Depending on the country or region, images and sounds may fail to be
played back if the video output format is set differently from the one in
use there. If this happens, change the video output format setting
(p.183).
• The camera display turns off and the volume cannot be adjusted by
turning the zoom lever while the camera is connected to AV
equipment.
When using the video output, images/movies are output at normal
resolution regardless of the resolution supported by the AV device. To
output HD video, use the HDMI output (p.140) or transfer to and play
back on a computer (p.196).