Filter
Top Products
192
5
Settings
3
Use the four-way controller (45) to switch between O
and P.
O The Startup Shortcut is available.
P The Startup Shortcut is not available.
You can use the camera as a clock. With the camera turned off, press
and hold down the 4 button to display the clock on the display.
1
Press and hold down the 4
button.
The camera turns on and the clock appears
on the screen.
The camera turns off automatically after
approximately 10 seconds.
Pressing the power button turns the camera off immediately.
You can reset the camera settings to their defaults. Refer to “Default
Settings” (p.216) for the reset settings.
1
Use the four-way controller (23) to select [Reset] in
the [W Setting 3] menu, and press the four-way
controller (5).
The [Reset] screen appears.
The default settings are all O.
Displaying the Clock Display
To disable the clock display by pressing 4 button, set [Clock Display]
to P (Off) on [Startup Shortcut] in the [W Setting 4] menu. (p.191)
Resetting to Default Settings (Reset)
NEW YORK
NEW YORK
20:25
20:25
LONDON
LONDON