Filter
Top Products
128
Shooting Functions
4
Using Mirror Up Function to Prevent
Camera Shake
Use the Mirror Up function if camera shake is evident even when cable
switch (optional) or remote control unit (optional) is used with a tripod.
When shooting with the 2 sec. Self-Timer, the mirror pops up and the
shutter is released 2 seconds after you press it, thereby avoiding the
vibration of the mirror.
Follow the procedure below to take a picture with the Mirror Up function.
1
Mount the camera onto a tripod.
2
In the Drive Mode, select Z (2 sec. Self-Timer).
1Self-Timer Shooting (p.122)
3
Press the shutter release button halfway.
The autofocus system operates. The focus indicator ] appears in the
viewfinder when focused.
4
Press the shutter release button fully.
The mirror pops up and the picture is taken 2 seconds later. AE lock is
enabled with the exposure value set immediately before the mirror goes
up.
The Shake Reduction function is automatically turned off when shooting with
the 2 sec. Self-Timer.