Filter
Top Products
16
1
Getting Started
Installing / Removing the SD Memory Card
The image or recorded sound is recorded on the SD Memory Card. Be
sure the camera is turned off before inserting or removing the SD
Memory Card.
Turn off the camera before setting or removing the card.
Wipe away water or dirt from the camera with a dry cloth before setting
or removing the card.
Do not set or remove the card with wet or dirty hands.
1 Slide the battery/card cover to the direction of the
arrow, and flip open.
2 With the label (or 2 symbol) of the SD Memory Card
toward the lens, insert the card into the card slot until
the card clicks.
3 Close the battery/card cover.
When removing the card, press down on the card in the direction of the
arrow. When the card pops out slightly, pull it out of the card slot.
The number of images that can be captured varies according to the
capacity of the SD Memory Card, the recorded image size, and image
quality (1p.17).
• If the battery/card cover is opened when the camera is on, the camera
is automatically turned off.
• If the battery/card cover is opened while saving an image, the save is
interrupted (the image is not saved).
SD Memory Card
Battery/card cover
1
3
2
00_Optio43WR-E.book Page 16 Tuesday, April 6, 2004 4:40 PM