Filter
Top Products
54
4
Taking Pictures
5 Take the first picture.
Press the shutter release button to take the
first picture. The right edge of the image is
displayed in transparent form at the left of the
LCD monitor.
6 Move the camera to the right, and
take the second picture.
Move the camera so that the actual screen
image overlaps the left edge of the
transparent image and press the shutter
release button. For the third photo and
subsequent photos, repeat Steps 5 and 6
and shoot.
To change the direction for joining images, begin again from Step 1.
To cancel Panorama Assist mode, switch to any other mode.
• The camera cannot join the images. Use the panorama software,
ACDSee for PENTAX, ACD PhotoStitcher, packed together with the
camera. For details on joining panorama images, see the separate
booklet PC Connection Manual.
• Continuous shooting and interval shooting are not possible in
Panorama Assist mode.
• It is not possible to delete images in Instant Review.
100
100
100
4/10/2004
4/10/2004
4/10/2004
11:20
11:20
11:20
9090
00_Optio43WR-E.book Page 54 Tuesday, April 6, 2004 4:40 PM