Filter
Top Products
103
4
Taking Pictures
Saving the Settings (Memory)
The Memory function is for saving the current camera settings when the
camera is turned off.
For some camera settings, the Memory function is always set to
O
(On) (the
settings are saved when the camera is turned off), while for others you can
choose on or off (to choose whether the settings are saved or not when the
camera is turned off). The items which can be set to
O
(On) or
P
(Off) in the
Memory function are shown in the table below. (Items not listed here will be
saved in the selected settings when the camera is turned off.) If you select
O
(On), the settings will be saved in the status they were in immediately
before the camera was turned off. If you select
P
(Off), the settings will be
reset to the defaults when the camera is turned off. The table below also
shows whether the Memory default setting for each item is on or off.
Item Description
Default
Setting
Flash Mode
The flash mode set with the four-way controller (4)
(p.87)
O
Drive Mode
The drive mode set with the four-way controller (2)
(p.76, p.77, p.78)
P
Focus Mode
The focus mode set with the four-way controller (5)
(p.85)
P
Zoom Position
The zoom position set with the Zoom/w/x button
(p.80)
P
MF Position
The manual focus position set with the four-way
controller (23) (p.86)
P
White Balance
The [White Balance] setting on the [A Rec.Mode]
menu (p.92)
P
Sensitivity
The [Sensitivity] setting on the [A Rec.Mode] menu
(p.96)
P
EV Compensation
The [EV Compensation] setting on the [A Rec.Mode]
menu (p.82)
P
AE Metering
The [AE Metering] setting on the [A Rec.Mode] menu
(p.94)
P
Digital Zoom
The [Digital Zoom] setting on the [A Rec.Mode] menu
(p.81)
O
DISPLAY
The LCD monitor information display mode set with the
4/W button (p.83, p.118)
P
File #
If a new SD Memory Card is inserted when On has
been selected, file numbers are assigned sequentially.
O