Pentax Optio W10 Digital Camera User Manual


 
93
4
Taking Pictures
5 Press the 4 button.
The White Balance setting is saved.
6 Press the 3 button.
The camera returns to capture status with the current setting.
Refer to “Manual Setting” below for instructions on adjusting the white
balance manually.
Have a blank sheet of white paper or similar material ready.
1 In the White balance screen, use the four-way controller
(23) to select K (Manual).
2 Point the camera at the blank
sheet of paper or other material so
that it fills the frame displayed in
the center of the screen.
3 Press the shutter release button
fully.
The white balance is automatically adjusted.
4 Press the 4 button.
The setting is saved and the screen returns to the [A Rec.Mode].
5 Press the 3 button.
The camera returns to capture status.
If you use the [White Balance] function frequently, you can save time
by assigning it to the Green button. (p.58)
Saving the White Balance 1p.103
Manual Setting
MENU
Adjust
SHUTTER
White Balance
Cancel
Cancel
OK
OK
OKCancel
OK