Pentax Optio W10 Digital Camera User Manual


 
86
4
Taking Pictures
The procedure for setting the focus manually (\) is described below.
1 Press the four-way controller (5)
in A mode.
2
Use the four-way controller (
5
) to
select
\
and press the
4
button.
The central portion of the image is
magnified to fill the screen of the LCD
monitor when focusing.
3 Press the four-way controller
(23).
The \ indicator appears on the LCD
monitor to indicate the approximate
distance to the subject. Use the four-way
controller (23) to adjust the focus using
the indicator as a guide.
2 : for distant focus
3 : for closer focus
4 Press the 4 button.
The focus is fixed and the camera returns to capture status.
In addition, the focus position is fixed five seconds after you remove
your finger from the four-way controller (5).
After the focus is fixed, you can press the four-way controller (5) again
to display the \ bar and readjust the focus.
•In y mode, the focus mode is set to s.
•In A mode, you can only select = and q.
Saving the Focus Mode 1p.103
Manual Focus
To switch from \ to another focus mode, press the four-way
controller (5) while the \ bar is displayed.
Capture mode and drive mode cannot be changed while the \ bar
is displayed.
Focus Mode
Focus Mode
Focus Mode
Manual Focus
Manual Focus
Manual Focus
OK
OK
OK
OK
OK
OK
OK
OK
38
38
38
2m
2m
0.5
0.5
11
2m
0.5
\ indicator