Pentax Optio W10 Digital Camera User Manual


 
188
9
Appendix
Troubleshooting
Problem Cause Remedy
Camera will not
turn on
Battery is not installed
Check if battery is installed. If not, install
battery.
Battery is installed
incorrectly
Check orientation of battery. Reinsert
battery according to +- symbols. (p.23)
Battery power is low Charge the battery.
No image on LCD
monitor
Camera is connected
to a PC
LCD monitor is off when camera is
connected to a computer.
Camera is connected
to a TV
LCD monitor is off when camera is
connected to a TV.
LCD monitor is set to
OFF
Press the 4/W button to turn
LCD monitor on. (p.83)
Image is displayed but
is hard to see
Image on LCD monitor may be hard to
see when taking pictures outside in
sunlight. Increase brightness of LCD
monitor. (p.171)
Shutter will not
release
Flash is charging
Pictures cannot be taken while the flash
is charging. Wait until charging is
finished.
No available space on
SD Memory Card or in
the built-in memory
Insert SD Memory Card with available
space or delete unwanted images. (p.28,
123)
Recording Wait until recording is finished.
Picture is dark
Subject is too far away
in a dark environment,
such as a night scene
Picture becomes dark if subject is too far
away. Take picture within range of flash.