Filter
Top Products
PENTAX FUNCTIONS
111
BASIC SETTING OF PENTAX FUNCTIONS
Follow the procedure below to set a Pentax Function.
1 Display Pentax Function No.
qTurn the mode dial to PF.
wMove the select switch to display the
Pentax Function No.You wish to set.
The Pentax Function No. will be dis-
played on the LCD panel
APPENDIX
110
PENTAX FUNCTIONS
The camera provides 11 Pentax Functions so you can set
the camera according to your shooting preferences.
[F1] Selection of range of auto bracketing correction value
p.113
[F2] Selection of re-set to single frame after auto bracketing
exposure
p.113
[F3] Selection of shutter release delay time with the remote
controller
p.114
[F4] Selection of whether or not auto focusing is used during
remote control photography
p.114
[F5] Selection of the metering method with AE lock
p.114
[F6] Selection of whether or not AE lock is used when the
subject is in focus.
p.115
[F7] Selection of autofocus method in the action
program mode
p.115
[F8] Selection of illumination method of the LCD panel
p.115
[F9] Selection of Mode dial illumination pattern when power
switch is turned ON
p.116
[F10] Selection of the state of the end of film when rewinding
p.116
[F11] Selection of the built-in flash in the wireless flash mode
p.116
Example:
Selection of Remote
controller operation
time.
Pentax Function No.
MZ-6(E)06 F1/109-118 11/8/02 12:11 PM Page 110