Filter
Top Products
146
Appendix
Problem
Cause
Remedy
Power will not
come on
No image on
the LCD
monitor
Shutter will not
be released
Battery is not installed
Check battery is installed.
If not, install battery.
Battery is installed
incorrectly
Check orientation of battery.
Reinsert battery with the label
towards front of camera. (p.13)
Battery power is low
LCD monitor is set to
OFF
Camera is connected
to TV
Image is displayed but
is hard to see
Flash is charging
No available space on
SD Memory
Card/MultiMediaCard
Insert SD Memory Card/
MultiMediaCard with available
space or delete unwanted
images. (p.16, 95)
When flash lamp blinks red, flash
is charging and no pictures can
be taken. Lamp lights red when
charging is completed.
Insert a charged battery or use
the AC adapter.
Press Display button to turn LCD
monitor on. (p.38)
LCD monitor remains off while
camera is connected to TV.
Image on LCD monitor may be
hard to see when taking pictures
outside in sunlight.
Recording
Wait until recording is finished.
Zoom does not
work
Super Macro mode
has been set.
The zoom is disabled in this
modes.
Connected to PC by
USB cable.
When connecting to PC, LCD
monitor is always On.
Troubleshooting