Filter
Top Products
17
Getting Started
● Precautions When Using a SD Memory Card/MultiMediaCard
• Make sure that the camera is turned off before opening the battery chamber/card
cover.
• The SD Memory Card is equipped with a write-protect switch. Setting the switch
to [LOCK] protects the existing data by prohibiting recording of new data,
deletion of existing data or formatting of the card.
• The SD Memory Card/MultiMediaCard formatted by other
equipment (camera, PC, etc) cannot be used on this camera.
Formatting must be done by this camera.
• Care should be taken if you remove the SD Memory Card/
MultiMediaCard immediately after using the camera, as the card
may be hot.
•
Do not remove the SD Memory Card/MultiMediaCard or turn the
camera off while data is being recorded on the card or transferred to
PC using USB cable as this may cause the data to be lost or the
card to be damaged.
• Do not bend the SD Memory Card/MultiMediaCard or subject it to violent
impact.
• Keep it away from water and store away from high temperature.
• Be sure to format unused SD Memory Cards/MultiMedia Cards or SD Memory
Cards/MultiMedia Cards that have been used on another camera. Refer to
“Formatting a SD Memory Card/MultiMediaCard” (p.124) for instructions on
formatting.
• Never remove the SD Memory Card/MultiMediaCard during formatting as this
may cause the card to be damaged and become unusable.
• The data on the SD Memory Card/MultiMediaCard may be erased in the
following circumstances. Pentax does not accept any liability for data that is
erased
• when the SD Memory Card/MultiMediaCard is mishandled by the user.
• when the SD Memory Card/MultiMediaCard is exposed to static electricity or
electrical interference.
• when the card has not been used for a long time.
• when the card is ejected, the AC adapter is disconnected or the battery is
removed while the data on the card is being accessed.
• The SD Memory Card/MultiMediaCard has a limited service life. If it is not used
for a long time, the data on the card may become unreadable. Be sure to make
a backup of important data on a PC.
• Avoid using or storing the card where it may be exposed to static electricity or
electrical interference.
• Avoid using or storing the card in direct sunlight or where it may be exposed to
rapid changes in temperature or to condensation.
Write-protect
switch