Filter
Top Products
27
Quick Start
Erasing the image displayed on the LCD monitor
While the image is displayed, you can erase it
by pressing the button (The Delete screen
will be displayed.), press the four-way controller
(̆) to select [Delete], and then pressing the OK
button.
Press the Playback button or press the shutter
release button halfway to return to shooting
status.
• When you turn the camera on while pressing the Playback button,
the camera turns on in Playback Only mode. As the lens does not
extend in Playback Only mode, this feature is useful when you
want to pass the camera to someone and show them the picture
you have just taken. To switch to the Capture mode, turn the
camera off and then turn it on again.
• You can enlarge the image displayed on the LCD monitor by
pressing the Zoom/ / button.
• When the screen is changed to the playback screen, the image
with the largest file number will be displayed first.
• In the case of movie pictures, the first frame will be displayed.
• If there are no images stored, the [No image] message will be
displayed.
Zoom Display
☞
p.88
Adding a Voice Memo
☞
p.89
100-0020
100-0020
100-0020
Cancel
Delete
MENU
OK
Ok
Ok
Exit
Exit
OkExit
File No.
memo