Filter
Top Products
36
3
Common Operations
Common Operations
Turning the Camera On and Off
1
Press the power switch.
The power indicator is illuminated by a green light. The lens extends
and the camera turns on in the Capture mode.
The camera is ready to take pictures by pressing the shutter release
button.
• Press the Q Playback button to switch to the Playback mode and
view pictures while the lens is extended.
• Hold down the Q Playback button for two seconds to activate the
Playback mode with the lens retracted.
• Hold down the Q Playback button for more than four seconds to
display the contents of the pictures stored in the built-in memory
with the SD Memory Card inserted.
2 Press the power switch again.
The camera turns off.
This camera has a built-in memory, but the built-in memory becomes
hidden when an SD Memory Card is inserted. You can activate the built-
in memory using the following procedure. You can save your favorite
pictures, movies, and sounds in the built-in memory and use the built-in
memory as a private album.
1 Confirm the SD Memory Card is set in the camera.
Switching between Capture Mode and Playback Mode
1p.50
Using the My Album Function
Power switch
Playback button
Power indicator
OK button