Filter
Top Products
90
Taking Pictures
4
You can select the sensitivity to suit the brightness of the surroundings.
Sensitivity
1 Press the MENU button in Capture mode.
The [A Rec.Mode] menu appears.
2 Use the four-way controller (23)
to select [Sensitivity].
3 Press the four-way controller (5).
The pull-down menu appears.
4 Use the four-way controller (23)
to change the sensitivity.
5 Press the shutter release button
halfway.
The camera is ready to take the picture.
Setting the Sensitivity
Auto
Flash does not discharge: Automatically set in a range from 50 to 200.
Flash discharges: Automatically set in a range from 50 to 400.
50
• The lower the sensitivity (the lower values), the sharper the image and
the less noise. The shutter speed will be slower in low light conditions.
• The higher the sensitivity (the higher values), the faster the shutter
speed in low light conditions to reduce camera shake, but the image
may be affected by noise.
100
200
400
Saving the Sensitivity 1p.102
You can select 800 or 1600 for Sensitivity in Blur reduction mode.
When auto is set, the Sensitivity is set automatically in a range from
50 to 1600.
Rec. Mode
MENU
Exit
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
AWB
Auto
7M
MENU
Shutter release
button
MENU button
Four-way
controller
Rec. Mode
MENU
Exit
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
AWB
Auto
7M
Rec. Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
AWB
Auto
7M
MENU
Cancel
OK
OK
100
200
400
50
Auto